EKWB - EK-Quantum Vector RTX RE Ti D-RGB - Nickel + Plexi

#EKW807 - 3,83111E+12

Nuovo

Disponibilità: ordinabile

130,33 €   IVA Esclusa

159,00 €   IVA Inclusa

- +

The EK-Quantum Vector RTX RE Ti D-RGB high-performance water block is an evolution of the original EK-Vector water block where the standard 12V RGB is changed with 5V D-RGB which has separately addressable diodes. This water block is specially designed for multiple reference NVIDIA® GeForce® RTX 2080 Ti graphics cards. This product is also compatible with the reference NVIDIA GeForce RTX SUPER cards.



This water block is compatible with all reference design GeForce RTX 2080 Ti-based graphics cards.

The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks. 

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of glass-like Acrylic. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with an addressable LED strip. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(addressable) header. 

- EK-Quantum Vector RTX RE Ti D-RGB series high-performance water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x Nickel plated brass plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

Scrivi una recensione

Scrivi una recensione

Prodotti Alternativi

Next Previous
Scorri